AlexxIT/go2rtc
Documented errors, page 2 of 4. Back to AlexxIT/go2rtc
| Code / Message | Type | Severity | Tags |
|---|---|---|---|
| milesone: patch session: | exception | error | |
| nest: max retries exceeded | exception | error | nest, webrtc, retry, timeout |
| xiaomi | exception | error | xiaomi, cloud, api, error-response |
| failed to decrypt packet | error_code | error | |
| ring: invalid refresh token encoding | exception | error | ring, authentication, url-encoding, token |
| no interfaces for listen | exception | error | mdns, network, multicast, discovery, interfaces |
| eseecloud: wrong start byte | exception | error | network, protocol, stream, camera |
| ffmpeg: unsupported params: | validation | error | ffmpeg, parameters, validation, go2rtc |
| can't find consumer | exception | error | |
| hap: wrong DeviceID: | exception | error | |
| streams: source not supported | validation | error | |
| multipart: no receivers | exception | error | configuration, kasa, mediamtx, receivers |
| : unable to decrypt | exception | error | dtls, crypto, tls, initialization |
| waw: unsupported codec | error_code | error | wav, audio, codec, unsupported-format |
| wrong request | exception | error | rtsp, parsing, protocol, server |
| wyze: failed to enable intercom | exception | error | wyze, backchannel, intercom, audio |
| ${allocResponse.Msg} | error_code | error | |
| not supported | error_code | error | |
| xiaomi: probe | error_code | error | streaming, probe, camera, error-wrapping |
| unsupported auth | error_code | error | |
| multitrans: auth failed | exception | error | http, authentication, digest-auth, handshake |
| streams: unsupported scheme: | validation | error | |
| streams: source from insecure producer | validation | error | |
| failed to encrypt password | exception | error | |
| ffmpeg: unsupported version: | exception | error | ffmpeg, version, compatibility, go2rtc |
| wyze: invalid URL | exception | error | wyze, url, config, parsing |
| hap: VerifyServerAuthenticator | exception | error | hap, srp, pairing, pin, authentication |
| gopro: wrong response: | exception | error | gopro, http, camera, http-status |
| streams: preload not found | exception | error | |
| ${loginResp.ErrorMsg} | error_code | critical | api, tuya, authentication, login |
| not implemented | panic | error | webrtc, codec, panic, unsupported-codec |
| ${sharedHomeListResponse.Msg} | error_code | error | api, tuya, http-error-response |
| streams: unknown error | exception | error | |
| webrtc: stream not found | exception | error | |
| tlv8: can't find T= ,L= ,V= for | exception | error | go, tlv8, unmarshal, homekit |
| tuya: wrong query params | validation | error | |
| wyze: no audio codec detected from camera | exception | error | wyze, backchannel, codec, negotiation |
| failed to marshal request body | exception | error | json, serialization, request-body |
| av login 1 failed | exception | error | tutk, dtls, network, login |
| connection is nil | exception | error | go, connection-state, lifecycle |
| hds: read buffer too small | exception | error | |
| mjpeg: no receivers | exception | error | mjpeg, producer, pipeline-wiring |
| nest: wrong status | exception | error | nest, http, oauth, token |
| producer without tracks | exception | error | homekit, streaming, invalid-state, client-init |
| wrong URL: | validation | error | |
| exec/pipe | exception | error | |
| exec: timeout | exception | error | timeout, exec, rtsp, process |
| multipart: no content length | exception | error | multipart, mjpeg, http-headers |
| wyze: no access token in response | exception | error | wyze, cloud, auth, api |
| failed to decode hex | exception | error | go, hex, encoding, validation, tuya |
| get track from none state | exception | error | |
| hap: GetAccessories zero answer | exception | error | hap, accessories, empty-response, homekit |
| ${mqttConfigResponse.Msg} | error_code | error | api, tuya, mqtt |
| stream not found | http | error | http, rtmp, flv, stream |
| timeout waiting for response | exception | error | timeout, ioctrl, camera, control |
| unsupported frame type | exception | error | websocket, protocol, parsing, network |
| add track from none state | exception | error | |
| hap: wrong response: %#v, on request: %#v | exception | error | go, hap, homekit, protocol |
| exec/rtsp | exception | error | |
| multitrans: talkback error | exception | error | go, multitrans, talkback, api |
| wrong login step | panic | error | xiaomi, auth, login, panic, state-machine |
| echo: bin not in allow_paths: | validation | error | security, whitelist, exec, go2rtc |
| failed to load hub config | exception | error | tuya, mqtt, cloud-api, config |
| hap: can't dial witout client_id or client_private | validation | error | hap, credentials, configuration, pairing |
| ${tokenResp.Msg} | error_code | critical | api, tuya, authentication |
| %w: %v | exception | error | dtls, crypto, tls, authentication |
| [alsa] set sw_params | exception | error | |
| failed to refresh session | exception | error | session, authentication, ring, http-401 |
| nest: tried to stop rtsp stream without a project or device… | exception | warning | state, streaming, rtsp, lifecycle |
| hass: wrong type: | exception | error | home-assistant, websocket, authentication, protocol |
| milesone: create session: | exception | error | |
| hass: wrong response | exception | error | home-assistant, webrtc, camera, websocket |
| ${tokenResponse.Msg} | error_code | error | |
| ${webRTCConfigResponse.Msg} | error_code | error | api, tuya, webrtc |
| user/pass not provided | validation | error | |
| wrong websocket accept | error_code | error | |
| ${reply} | exception | error | |
| alsa: unknown path | exception | error | |
| exec: bin not in allow_paths: | validation | error | security, whitelist, exec, go2rtc |
| wrong candidate | error_code | error | webrtc, sdp, candidate, address-format |
| hap: insecure PIN: | validation | error | |
| pcm: unsupported audio format | validation | error | audio, codec, invalid-argument-value |
| api.StreamNotFound | exception | error | hls, websocket, stream-not-found, go2rtc |
| hap: read buffer is too small | exception | error | |
| hap: wrong http status: | http | error | hap, http, http-status, homekit |
| streams: stream not found | exception | error | |
| adts: wrong header | exception | error | |
| wyze: probe | exception | error | |
| wrong message prefix | exception | error | |
| av login too short: bytes | exception | error | protocol, validation, packet, intercom |
| hap: no free streams | exception | warning | hap, stream, resource-exhaustion, homekit |
| yandex: login error | exception | error | |
| dvrip: wrong packet: %0.16x | exception | error | |
| hap: wrong request: %#v | exception | error | go, hap, homekit, protocol |
| wrong message checksum | exception | error | |
| Code must be in the range [0, 125] | http | warning | http, api, validation, exit-code |
| ${roomListResponse.Msg} | error_code | error | api, tuya, http-error-response |
| RTSP wrong input | exception | error | |
| failed to marshal session request | exception | error | json, serialization, ring |
| yaml: path not exist | validation | error |