XIU2/CloudflareSpeedTest · info

[信息] 缺少配置项 [EMAIL]，由 [API 密钥] 方式转为 [API 令牌] 方式!

Error message

[信息] 缺少配置项 [EMAIL]，由 [API 密钥] 方式转为 [API 令牌] 方式!

What it means

This is informational, not fatal: when EMAIL is empty in cfst_ddns.conf, _READ() prints the [信息] message at script/cfst_ddns.sh:23 and continues. Empty EMAIL selects the API-token branch: _UPDATE() sends Authorization: Bearer ${KEY} (lines 54-59) instead of the X-Auth-Email/X-Auth-Key global-key pair (lines 47-53).

Source

Thrown at script/cfst_ddns.sh:23

#	项目: CloudflareSpeedTest 自动更新域名解析记录
#	版本: 1.0.5
#	作者: XIU2
#	项目: https://github.com/XIU2/CloudflareSpeedTest
# --------------------------------------------------------------

_READ() {
	[[ ! -e "cfst_ddns.conf" ]] && echo -e "[错误] 配置文件不存在 [cfst_ddns.conf] !" && exit 1
	CONFIG=$(cat "cfst_ddns.conf")
	FOLDER=$(echo "${CONFIG}"|grep 'FOLDER='|awk -F '=' '{print $NF}')
	[[ -z "${FOLDER}" ]] && echo -e "[错误] 缺少配置项 [FOLDER] !" && exit 1
	ZONE_ID=$(echo "${CONFIG}"|grep 'ZONE_ID='|awk -F '=' '{print $NF}')
	[[ -z "${ZONE_ID}" ]] && echo -e "[错误] 缺少配置项 [ZONE_ID] !" && exit 1
	DNS_RECORDS_ID=$(echo "${CONFIG}"|grep 'DNS_RECORDS_ID='|awk -F '=' '{print $NF}')
	[[ -z "${DNS_RECORDS_ID}" ]] && echo -e "[错误] 缺少配置项 [DNS_RECORDS_ID] !" && exit 1
	KEY=$(echo "${CONFIG}"|grep 'KEY='|awk -F '=' '{print $NF}')
	[[ -z "${KEY}" ]] && echo -e "[错误] 缺少配置项 [KEY] !" && exit 1
	EMAIL=$(echo "${CONFIG}"|grep 'EMAIL='|awk -F '=' '{print $NF}')
	[[ -z "${EMAIL}" ]] && echo -e "[信息] 缺少配置项 [EMAIL]，由 [API 密钥] 方式转为 [API 令牌] 方式!"
	TYPE=$(echo "${CONFIG}"|grep 'TYPE='|awk -F '=' '{print $NF}')
	[[ -z "${TYPE}" ]] && echo -e "[错误] 缺少配置项 [TYPE] !" && exit 1
	NAME=$(echo "${CONFIG}"|grep 'NAME='|awk -F '=' '{print $NF}')
	[[ -z "${NAME}" ]] && echo -e "[错误] 缺少配置项 [NAME] !" && exit 1
	TTL=$(echo "${CONFIG}"|grep 'TTL='|awk -F '=' '{print $NF}')
	[[ -z "${TTL}" ]] && echo -e "[错误] 缺少配置项 [TTL] !" && exit 1
	PROXIED=$(echo "${CONFIG}"|grep 'PROXIED='|awk -F '=' '{print $NF}')
	[[ -z "${PROXIED}" ]] && echo -e "[错误] 缺少配置项 [PROXIED] !" && exit 1
}

_UPDATE() {
	# 这里可以自己添加、修改 CFST 的运行参数
	./cfst -o "result_ddns.txt"

	# 判断结果文件是否存在，如果不存在说明结果为 0
	[[ ! -e "result_ddns.txt" ]] && echo "CFST 测速结果 IP 数量为 0，跳过下面步骤..." && exit 0

	CONTENT=$(sed -n "2,1p" result_ddns.txt | awk -F, '{print $1}')

View on GitHub (pinned to 1da0c025d7)

Solutions

  1. If you use an API Token: nothing to fix — verify the token has Zone -> DNS -> Edit rights on the zone and that KEY holds the token
  2. If you use the Global API Key: add EMAIL=you@example.com and set KEY to the 37-character global key from My Profile -> API Tokens
  3. Confirm the mode by checking which curl branch runs (Bearer vs X-Auth-* headers) or the Cloudflare API response

Example fix

# cfst_ddns.conf (before, token mode)
EMAIL=
KEY=<api-token>
# (after, global-key mode)
EMAIL=you@example.com
KEY=<37-char-global-key>
Defensive patterns

Strategy: validation

Validate before calling

email=$(grep '^EMAIL=' cfst_ddns.conf | head -1 | cut -d= -f2-)
key=$(grep '^KEY=' cfst_ddns.conf | head -1 | cut -d= -f2-)
[ -z "$email" ] && echo 'token mode: KEY must be an API Token with Zone.DNS Edit' >&2
[ -n "$email" ] && echo 'global-key mode: KEY must be the Global API Key' >&2

Prevention

When it happens

Trigger: EMAIL= line absent, commented, or empty in cfst_ddns.conf; the script never exits for this — it only switches the authentication mode of the Cloudflare API PUT.

Common situations: Intentional setup with a scoped API Token (no email needed); accidental omission when the user only has a Global API Key, which then fails later with HTTP 403/400 on the PUT because a global key was sent as a Bearer token.

Related errors

AI-assisted analysis of XIU2/CloudflareSpeedTest@1da0c025d7 (2026-08-15). Data as JSON: /api/errors/31937638f1aa8ea9. Report an issue: GitHub.