What causes "[错误] 缺少配置项 [NAME] !" in XIU2/CloudflareSpeedTest?

Set NAME to the FQDN of the record whose ID is in DNS_RECORDS_ID, e.g. NAME=ddns.example.com

[错误] 缺少配置项 [NAME] !

Error message

[错误] 缺少配置项 [NAME] !

What it means

_READ() extracts NAME from cfst_ddns.conf (grep 'NAME=' | awk -F '=' '{print $NF}') and exits 1 at script/cfst_ddns.sh:27 when empty. NAME is the DNS record's hostname, interpolated unquoted into the PUT JSON — "name":"${NAME}" (lines 53/59) — and Cloudflare validates it against the record being modified.

Source

Thrown at script/cfst_ddns.sh:27

# --------------------------------------------------------------

_READ() {
	[[ ! -e "cfst_ddns.conf" ]] && echo -e "[错误] 配置文件不存在 [cfst_ddns.conf] !" && exit 1
	CONFIG=$(cat "cfst_ddns.conf")
	FOLDER=$(echo "${CONFIG}"|grep 'FOLDER='|awk -F '=' '{print $NF}')
	[[ -z "${FOLDER}" ]] && echo -e "[错误] 缺少配置项 [FOLDER] !" && exit 1
	ZONE_ID=$(echo "${CONFIG}"|grep 'ZONE_ID='|awk -F '=' '{print $NF}')
	[[ -z "${ZONE_ID}" ]] && echo -e "[错误] 缺少配置项 [ZONE_ID] !" && exit 1
	DNS_RECORDS_ID=$(echo "${CONFIG}"|grep 'DNS_RECORDS_ID='|awk -F '=' '{print $NF}')
	[[ -z "${DNS_RECORDS_ID}" ]] && echo -e "[错误] 缺少配置项 [DNS_RECORDS_ID] !" && exit 1
	KEY=$(echo "${CONFIG}"|grep 'KEY='|awk -F '=' '{print $NF}')
	[[ -z "${KEY}" ]] && echo -e "[错误] 缺少配置项 [KEY] !" && exit 1
	EMAIL=$(echo "${CONFIG}"|grep 'EMAIL='|awk -F '=' '{print $NF}')
	[[ -z "${EMAIL}" ]] && echo -e "[信息] 缺少配置项 [EMAIL]，由 [API 密钥] 方式转为 [API 令牌] 方式!"
	TYPE=$(echo "${CONFIG}"|grep 'TYPE='|awk -F '=' '{print $NF}')
	[[ -z "${TYPE}" ]] && echo -e "[错误] 缺少配置项 [TYPE] !" && exit 1
	NAME=$(echo "${CONFIG}"|grep 'NAME='|awk -F '=' '{print $NF}')
	[[ -z "${NAME}" ]] && echo -e "[错误] 缺少配置项 [NAME] !" && exit 1
	TTL=$(echo "${CONFIG}"|grep 'TTL='|awk -F '=' '{print $NF}')
	[[ -z "${TTL}" ]] && echo -e "[错误] 缺少配置项 [TTL] !" && exit 1
	PROXIED=$(echo "${CONFIG}"|grep 'PROXIED='|awk -F '=' '{print $NF}')
	[[ -z "${PROXIED}" ]] && echo -e "[错误] 缺少配置项 [PROXIED] !" && exit 1
}

_UPDATE() {
	# 这里可以自己添加、修改 CFST 的运行参数
	./cfst -o "result_ddns.txt"

	# 判断结果文件是否存在，如果不存在说明结果为 0
	[[ ! -e "result_ddns.txt" ]] && echo "CFST 测速结果 IP 数量为 0，跳过下面步骤..." && exit 0

	CONTENT=$(sed -n "2,1p" result_ddns.txt | awk -F, '{print $1}')
	if [[ -z "${CONTENT}" ]]; then
		echo "CFST 测速结果 IP 数量为 0，跳过下面步骤..."
		exit 0
	fi

View on GitHub (pinned to 1da0c025d7)

Solutions

Set NAME to the FQDN of the record whose ID is in DNS_RECORDS_ID, e.g. NAME=ddns.example.com
Confirm the name matches what Cloudflare shows for that record (zone apex is @ -> example.com)
Check the line is uncommented with no spaces around '='
Re-run and verify _READ completes

Example fix

# cfst_ddns.conf (before)
NAME=
# (after)
NAME=ddns.example.com

Defensive patterns

Strategy: validation

Validate before calling

name=$(grep '^NAME=' cfst_ddns.conf | head -1 | cut -d= -f2-)
[[ $name =~ ^[a-zA-Z0-9._-]+\.[a-zA-Z]{2,}$ ]] || { echo "NAME not an FQDN: '$name'" >&2; exit 1; }

Type guard

is_fqdn(){ [[ $1 =~ ^[a-zA-Z0-9._-]+\.[a-zA-Z]{2,}$ ]]; }

Prevention

Always write the FQDN (ddns.example.com), matching the record shown in the dashboard
Keep NAME and DNS_RECORDS_ID in sync — the id points at one name; a mismatch gets HTTP 400
Dry-run the PUT with curl once to let Cloudflare validate name/type before cron depends on it

When it happens

Trigger: cfst_ddns.conf has a missing, commented, or empty 'NAME=' line.

Common situations: User forgot to fill the hostname; entered a bare subdomain ('ddns') instead of the FQDN ('ddns.example.com') which Cloudflare then normalizes or rejects; changed the subdomain later without updating the conf. NAME contains dots but no '=', so the last-field awk extraction is safe.

Related errors

AI-assisted analysis of XIU2/CloudflareSpeedTest@1da0c025d7 (2026-08-15). Data as JSON: /api/errors/1f1a429e22091413. Report an issue: GitHub.